Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Wrench and Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Bolts into pre-drilled holes in
Ports (D) and (E), then tighten.
(See Figure 1)
STEP 3
Attach Post (D) to unit
with Shaped Washers
and Head Cap Bolts.
Tighten all Head Cap Bolts.
E
D
B
C
STEP 2
Attach Post (E) to
Upper Stretcher (B)
and Lower Stretcher (C)
with Shaped Washers
and Head Cap Bolts.
Tighten all Head Cap Bolts.
(See Figure 2)
Figure 1
Figure 2
E
D
Shaped Washer
Head Cap Bolt
Bolt
Head Cap Bolt
Shaped Washer
