Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
B
Cam Lock Screw
A
STEP 1
Place Top (A) and Bottom (B)
on a soft cloth.
Insert Cam Lock Screws into
pre-drilled holes in Top (A) and
Bottom (B), then tighten.
(See Figure 1)
Figure 1
STEP 2
Attach Feet (L) to
Bottom (B)
with Flat Washers,
Spring Washers and
Head Cap Bolts (long).
(See Figure 2)
Attach Support (M) to unit.
(See Figure 3)
B
L
L
L
L
Flat Washer
Spring Washer
Head Cap Bolt (long)
M
Figure 3
Figure 2
