Assembly Instructions 4/5
STEP 5
Slide Back Panel (G) into position.
Attach Top (A) to unit with
Head Cap Bolts, Spring Washers
and Flat Washers, tightening bolts
only halfway.
Tighten all bolts used in Steps 3, 4 and 5.
A
Flat Washer
Spring Washer
Head Cap Bolt
STEP 6
Attach Doors (H) and (I) to
unit by sliding door hinges into
side panel hinges. (See Figure 5)
Attach Knobs to Doors (H) and (I) with Machine Screws.
Insert Adjustable Pins into side panels and middle panel at desired level.
(See Figure 6)
Place Shelves (J) into position.
Level unit by adjusting the adjustable levelers on bottom of unit.
(See Figure 7)
Note: Unit must be level to work properly.
Figure 6
Figure 7
Figure 5
Adjustable Pin
Machine Screw
Knob
J
J
G
H
I
