Assembly Instructions 4/8
STEP 4
Attach unit to Side Panel (C) with Cam Locks,
Flat Washers, Spring Washers and
Head Cap Bolts, tightening bolts only halfway.
(See Figure 3)
Attach Rails (G) to unit with Wood Screws,
into pre-drilled holes. (See Figure 4)
G
G
Wood Screw
C
Cam Lock
STEP 5
Attach Side Panel (B) to unit with
Cam Locks, Wood Screws, Flat Washers,
Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
Tighten all bolts used in Steps 4 and 5.
Turn unit to its’ upright position.
Cam Lock
Flat Washer
Spring Washer
Head Cap Bolt
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
Figure 3
Figure 4
B