Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Figure 1
Figure 2
C
B
F
E
A
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
STEP 2
Attach Back Frame (D) to unit
with Flat Washers, Spring Washers,
Head Cap Bolts (short), Head Cap Bolts (long)
and Wood Screws. (See Figures 3 and 4)
Tighten all Head Cap Bolts.
Figure 3
Figure 4
D
Wood Screw
Head Cap Bolt (long)
Spring Washer
Flat Washer
Head Cap Bolt (short)
Spring Washer
Flat Washer
STEP 1
Attach Legs (B) and (C) to Seat (A) with
Flat Washers, Spring Washers and
Head Cap Bolts. (See Figure 1)
Tightening the bolts only half way.
Attach Side Stretchers (E) and (F)
to unit with Wood Screws.
(See Figure 2)
