Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in future.
Figure 1
Figure 2
STEP 1
Attach Side Panels (C) and (D) to Back Panel (E), then flip the locks. (See Figures 1 and 2)
E
C
D
Lock
B
H
H
H
H
STEP 2
Attach Base (B) to unit, then flip the locks.
Insert Feet (H) into pre-drilled
holes of Base (B), then tighten.
Lock
