ZTH100 Operating Instructions
060902
HomePro
by ADVANCED CONTROL TECHNOLOGIES, INC.
5
4.2.1 ADD MODULE TO GROUP
Adding a module to a group using the menu is done this way:
Alternatively if the group has been named, the name shows up instead of the number. To add more units repeat
the procedure “ADD UNIT TO GROUP”
4.2.2 ADD MODULE TO SCENE.
Adding a module to a scene is done this way:
Note that hitting “C” will not clear units that already have been stored in the selected scene. A module is stored when
“Switch included” is shown in the display.
