RP200
Light Module
P515-998
FOR INDOOR USE ONLY!
DO NOT use with non-resistive loads, such as florescent lighting, CFL bulbs or motors.
To reduce the risk of electric shock, this product has a grounding type plug that has a third (grounding) pin.
This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
Any modification or use other than described may damage the unit and will void the warranty.
Install the light module.
Install into any indoor, three-prong, 120 volt A/C outlet.
•
1
(Optional) Plug a lamp into the Z-Wave™ (two-prong) side of
the light module.
A lamp (25 watts minimum and 300 watts maximum) can be
•
controlled through Z-Wave™ side of light module.
DO NOT use a CFL (compact fluorescent light bulb).
•
The light module works like a dimmer switch and will not function
properly with CFL and LED bulbs or electric devices with motors,
like fans.
Make sure that lamp switch is in the ON position.
•
Pass-through (three-prong) outlet (1500 watts maximum) is NOT
•
controlled by the system and functions as a standard electrical
outlet.
2
Max. 300W
Incandescent
Z-Wave™
Side
Pass-through
Side
Enroll the light module into the bridge.
Disconnect power and Ethernet from the bridge.
a.
Install a new 9 volt battery into the bridge.
b.
Hold the bridge within 6 feet (1.8 meters) of the light module
c.
throughout all of step 3.
Press and release the plus (+) button on the bridge.
d.
Double-click the button on the light module.
e.
Observe the lights on bridge. The orange light will blink while
f.
enrollment is taking place. Enrollment is complete when the
orange light becomes solid.
Reconnect power and Ethernet to the bridge.
g.
3
First
Press
+
Then Press
Within
6’ (1.8 m)
Содержание ZDP100
Страница 6: ......
