HOMEPIN Spinal Tap Pinball, Руководство по обслуживанию

Страница: 11 / 55

General Illumination - This is Spinal Tap Pinball (TAP)
FEB 2022 – REV 1.4
Topper Control #1 MPU J12 J12 Pin 1 GI 1 J13 P10
*** ABOVE GI IS NOT WIRED TO PLAYFIELD ***
Arena GI strips (left and right) Orange/White GI 2 J13 P9
Love Pump Spot Target (rear illumination) Pink thin GI 3 J13 P8
L Spinner Void & VUK x 2 lamps Brown thin GI 4 J13 P7
Left Upper Passive Void x 2 lamps Purple/White thin GI 5 J13 P6
White plastics Grey thin GI 6 J13 P5
Green plastics White thin GI 7 J13 P4
P3 – KEY
Left ramp lift void Yellow/White thin GI 8 J13 P2
ORANGE THICK +12V J13 P1
********** ********** *********** ************ ************
ORANGE THICK +12V J14 P1
P2 - KEY
Under Stage Red thin GI 9 J14 P3
Drop Target Void (behind D.Targets) Green thin GI 10 J14 P4
RIGHT Sling Blue thin GI 11 J14 P5
LEFT Sling Black/White thin GI 12 J14 P6
Flash (red 1W) Green/White thin GI `13 J14 P7
Down(wht 1W) Red/White thin GI 14 J14 P8
Pop Bumper LEFT Up (red LEDs) Blue/White thin GI 15 J14 P9
Flash (red 1W) Green/White thin GI 13 J14 P7
Down (wht 1W) Red/White thin GI 14 J14 P8
Pop Bumper LOWER Up (red LEDs) Blue/White thin GI 15 J14 P9
Flash (red 1W) Green/White thin GI 13 J14 P7
Down (wht 1W) Red/White thin GI 14 J14 P8
Pop Bumper RIGHT Up (red LEDs) Blue/White thin GI 15 J14 P9
Right spots & Right Spinner x 2 Black thin GI 16 J14 P10
ORANGE large wire is feed for 12v to all GI lamps from one or both of the following:
J13 P1 – J14 P1
p
red/white=down, green/white=flash
Left, 2 nd & 3 rd Rollovers
4 th & 5 th Rollovers – SKILL shot lane
NOTE: Wire colours on actual pop assemblies 12V=orange, blue/white=up
11