HomeMatic HmIP-WRCC2, Инструкция по монтажу и руководство по эксплуатации

Страница: 36 / 50

36
Start-up
5 Start-up
5.1 Teaching-in
Read this entire section before starting the
teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, refer to the operating
manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, refer to the
Homematic IP User Guide, available for download
in the download area of www.homematic-ip.com.
To integrate the wall-mount remote control into your
system and enable it to communicate with other
Homematic IP devices, you must teach-in the device to
your Homematic IP Access Point first.
To teach-in the device, please proceed as follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item
“Teach-in device” .
• Turn over the push-button (A) .
• Remove the insulation strip from the battery
compartment (F) . Teach-in mode remains