HomeMatic HmIP-SWSD, Инструкция по монтажу и руководство по эксплуатации

Страница: 51 / 65

51
Start-up
• Use the opposite bore holes to fasten the ceiling
bracket with two screws.
• Use a pen to mark the bore hole positions of the
ceiling bracket to the ceiling (see figure 5) .
• Drill the bore hole. When using the supplied plug
you will need a 5 mm drill.
If you want to mount the device to a wooden
ceiling, you can pre-drill 2 mm using a wood drill
bit to make screws easier to insert.
• Use the screws supplied and the previously in-
serted plugs to fasten the ceiling bracket to the
ceiling.
• Before inserting the smoke alarm device into the
ceiling bracket, briefly press the test button first.
• Turn the smoke alarm in a clockwise direction into
the ceiling bracket until it clicks into place (see fig-
ure 4a and 4b) .
The smoke alarm can also be mounted with a
standard installation box. Therefore, please use
the two bore holes with a distance of 60 mm and
fasten the ceiling bracket by inserting appropriate
screws.