30
Start-up
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the key ring remote control into your system
and enable it to communicate with other Homematic IP
devices, you must teach-in the device to your Homemat-
ic IP Access Point first.
To teach-in the key ring remote control, please proceed
as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item
“Teach-in device”
.
• Open the battery compartment
(H)
at the rear
by pushing the battery compartment cover away
from the device. You will need to apply some
pressure to do this (
see figure 2
).
• This will open the catch and the battery compart-
ment cover can be opened (the cover remains
attached to the housing).
• Remove the insulation strip from the battery
compartment
(H)
of the key ring remote control
to activate the device. Teach-in mode remains
activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(G)
shortly
(see figure 3)
.
