39
Restore factory settings
7
Restore factory settings
The factory settings of your Access Point as well as of
your entire installation can be restored. The operations
distinguish as follows:
• Resetting the Access Point:
Here, only the factory settings of the Access
Point will be restored. The entire installation will
not be deleted.
• Resetting and deleting the entire installation
:
Here, the entire installation is reset. Afterwards,
the app has to be uninstalled and reinstalled.
The factory settings of your single Homematic IP
devices have to be restored as to enable them to
be connected again.
7.1
Resetting the Access Point
To restore the factory settings of the Access Point, please
proceed as follows:
• Disconnect the Access Point from the power
supply. Therefore, unplug the mains adapter.
• Plug-in the mains adapter again and press and
hold down the system button for 4s at the same
time, until the LED will quickly start flashing
orange.
• Release the system button again.
• Press and hold down the system button again for
4 seconds, until the LED lights up green. If the
