HomeMatic HmIP-DBB, Инструкция по монтажу и руководство по эксплуатации

Страница: 32 / 42

30
Changing battery
partment (D) .
• Insert a new 1.5 V LR03/micro/battery into the
battery compartment, making sure that it is the
right way round
(see figure 6) .
• Place the doorbell button into the wall bracket.
Once the battery has been inserted, the doorbell button
will perform a self-test (approx. 2 seconds). Afterwards,
initialisation is carried out. The LED test display will in-
dicate that initialisation is complete by lighting up or-
ange and green (see sec. “9.4 Error codes and flashing
sequences” on page 33).
Caution! There is a risk of explosion if the battery
is not replaced correctly. Replace only with the
same or equivalent type. Never recharge standard
batteries. Do not throw the batteries into a fire. Do
not expose batteries to excessive heat. Do not
short-circuit batteries. Doing so will present a risk
of explosion.
Used batteries should not be disposed of with
regular domestic waste! Instead, take them to
your local battery disposal point.