Homematic IP HmIPW-SMI55, Инструкция по установке и эксплуатации

Страница: 40 / 51

40
Start-up
connection pins into the appropriate bracket of
the mounting plate (see
figure 5 ).
• Switch the Homematic IP wired bus on again to
activate the teach-in mode of the device (see „5.4
Teaching-in“ on page 41).
5.3 Mounting in multiple combinations
You can mount the device with the frame (B) provided or
use it with frames of other manufacturers. The electronic
unit
(C) can also be integrated into a multi-gang frame
(see figure 6 ). For mounting with multiple combinations,
make sure that the mounting plate of the device is
seamlessly aligned to the already fixed mounting plate/
retaining ring. The frames of the following manufacturers
can be used:
Manufacturer Frame
Berker S.1, B.1, B.3, B.7
Busch Jaeger carat*, future linear*, solo*, Busch-
axcent*, Busch-dynasty*, balance SI
ELSO Joy
GIRA Standard 55, E2, E22, Event, Esprit,
ClassiX, E3
merten 1-M, Atelier-M, M-Smart, M-Arc,
M-Star, M-Plan, M-Pure, System An-
tik*,
System Fläche*, System Design*
JUNG A 500, AS 500, A plus, A creation
Kopp Athenis
*with 55 mm intermediate frames of the manufacturer