30
Start-up
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, refer to the operating
manual of the Access Point.
To integrate the key ring remote control into your system
and enable it to communicate with other Homematic IP
devices, you must teach-in the device to your Homemat-
ic IP Access Point first.
To connect it, proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item
“Teach-in device”
.
• Open the battery compartment
(G)
at the rear
by pushing the battery compartment cover away
from the device. You will need to apply some
pressure to do this (
see figure 2
).
• This will open the catch and the battery compart-
ment cover can be opened (the cover remains at-
tached to the housing).
• Remove the insulation strip from the battery
compartment
(H)
of the key ring remote control
(first set-up) or insert an empty battery to activate
the device (
see figure 3
). Teach-in mode remains
activated for 3 minutes.
Содержание HmIP-KRCK
Страница 3: ...1 F G A B C D E ...
Страница 4: ...2 3 2 1 ...
Страница 5: ...4 5 4 s click ...
Страница 6: ...4 s 7 4 s 6 ...
