6
On/Off
Pressing the ‘on/off’ switch will turn the Evaporative Cooler on at medium
speed. After 3 seconds, it will revert to low speed or to the pre-programmed
memory settings. When the Evaporative Cooler is in operation, pressing this
switch will turn it off. The memory function will remember the settings in use
when the Evaporative Cooler is turned off and re-use the same settings when it
is switched on again.
Care and Cleaning Instructions
Please ensure the appliance is disconnected from the power supply and
switched off before attempting to clean.
This appliance is not designed to be dismantled without special tools. Please do
not attempt to separate the unit. Cleaning of the unit should only be attempted
with a slightly damp, soapy cloth. Care must be taken to ensure that the cloth
is sufficiently dry to not leave any water behind. After wiping down the unit with
the soapy cloth, dry any wet spots with a paper towel.
