Page 11
WIDE SWEEPER
NOZZLE
CRUISE CONTROL
(THROTTLE LOCK)
THROTTLE TRIGGER
��
Check your equipment before operation, especially the
muffler, air intakes, and air filters.
��
Use rakes and brooms to loosen debris before blowing.
�
In dusty conditions, slightly dampen surfaces when water
is available.
���
Watch out for children, pets, open windows or freshly
washed cars, and blow debris safely away.
�
Use the full blower nozzle extension so the air stream can
work close to the ground.
�
After using blowers or other equipment, CLEAN UP!
Dispose of debris in trash receptacles.
�
The wide sweeper nozzle allows for large areas to be
covered during blowing operation.
CRUISE CONTROL (THROTTLE LOCK)
See Figure 7.
The cruise control (throttle lock) can be used to operate the
blower without continuously holding the throttle trigger.
To engage the cruise control:
�
For full throttle, depress the throttle trigger fully and slide
the cruise control selector as far forward as possible.
To reduce engine speed, slide the cruise control selector
toward the back of the blower until the desired speed is
reached.
To release the cruise control, return the cruise control
selector to the off position.
OPERATION
Fig. 6
Fig. 7
