Page
iMPORTANT SAFETy iNSTRUcTiONS
WARNiNg:
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock,
fire, and/or serious personal injury.
REAd ALL iNSTRUcTiONS
For safe operation, read and understand all instructions
before using this product. Be familiar with all controls and
proper use of the machine. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.
Do not allow children or untrained individuals to use this
unit.
Thoroughly inspect the area where the equipment is to
be used and remove all foreign objects.
Wear safety glasses or goggles that are marked to comply
with ANSI Z87.1 standard when operating this product.
Dress properly.
Wear heavy long pants, boots, and gloves.
Do not wear loose fitting clothing, short pants, or go
barefoot. Do not wear jewelry of any kind.
Secure long hair above shoulder level to prevent entan-
glement in moving parts.
Keep all bystanders, children, and pets at least 50 ft. away.
Stay Alert — Watch what you are doing; use common
sense
. Do not operate this unit when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
Keep firm footing and balance. Do not overreach. Over-
reaching can result in loss of balance or exposure to hot
surfaces.
Keep all parts of your body away from any moving part.
Inspect the unit before each use for loose fasteners, etc.
Replace any damaged parts before use.
When not in use, product should be stored indoors in a
dry, locked up place—out of the reach of children.
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
numbness, and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these
symptoms. It is presently unknown what, if any, vibrations
or extent of exposure may contribute to the condition.
There are measures that can be taken by the operator to
possibly reduce the effects of vibration:
a) Keep your body warm in cold weather. When operating
the unit wear gloves to keep your hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
b) After each period of operation, exercise to
increase blood circulation.
c) Take frequent work breaks. Limit the amount of
exposure per day.
d) Keep the product well maintained, fasteners
tightened and worn parts replaced.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician about
these symptoms.
Use only original manufacturer’s replacement parts. Failure
to do so may cause poor performance, possible injury,
and will void your warranty.
Do not, under any circumstance, use any attachment or
accessory on this product which was not provided with
the product or identified as appropriate for use with this
product in the operator’s manual.
Avoid dangerous environments. Do not use the product
in damp or wet locations. Do not use in rain.
Use the right appliance. Do not use the hedge trimmer
for any job except that for which it is intended.
Do not use on steps, a ladder, or unstable support. Stable
footing on a solid surface enables better control of the
product in unexpected situations.
Do not force the hedge trimmer. It will do the job better
and with less likelihood of a risk of injury at the rate for
which it was designed.
dANgER — Keep hands away from cutting area. Keep
both hands on handles when power is on.
Keep hands away from blades. Do not reach underneath
work or around or over the blade while blade is rotating.
Do not attempt to remove cut material when blade is
moving. Make sure trimmer is off when clearing jammed
materials from blades. Do not grasp the exposed cutting
blades or cutting edges when picking up or holding the
hedge trimmer.
cAUTiON — Blade coasts after being turned off.
To reduce the risk of electric shock, this product has a
polarized plug (one blade is wider than the other) and will
require the use of a polarized extension cord. The plug
will fit into a polarized extension cord only one way. If the
plug does not fit fully into the extension cord, reverse the
plug. If the plug still does not fit, obtain a correct polarized
extension cord. A polarized extension cord will require
the use of a polarized wall outlet. This plug will fit into the
polarized wall outlet only one way. If the plug does not fit
fully into the wall outlet, reverse the plug. If the plug still
does not fit, contact a qualified electrician to install the
proper wall outlet. Do not change the equipment plug,
extension cord receptacle, or extension cord plug in any
way.
Do not abuse the cord. Never use the cord to carry the
product or to disconnect the plug from an outlet. Keep
cord away from heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
Make sure your extension cord is in good condition.