manualshive.com logo in svg

Homelite HH110, Руководство пользователя, Страница: 4 / 16

Поделиться
Скачать
Homelite HH110 Скачать руководство пользователя страница 4

4

100507

PORTABLE SPACE HEATER

FUELS

Do not use heavy fuels such as No. 2 fuel oil
or No. 2 Diesel. Using heavy fuels will
result in:

• clogged fuel filter and nozzle

• carbon build-up on spark plug

• the need of non-toxic anti-icer in fuel

during very cold weather

IMPORTANT:

 Use a KEROSENE ONLY

storage container. Be sure storage container
is clean. Foreign matter such as rust, dirt, or
water will cause the flame-out control to
shut down heater. Foreign matter may also
require you to clean fuel system often.

 WARNING: Use only kerosene

or No. 1 fuel oil to avoid risk of fire
or explosion. Never use gaso-
line, naphtha, paint thinners, al-
cohol, or other highly flammable
fuels.

These models are furnished with wheels and
a front handle. Wheels, handle, and the
mounting hardware are found in the ship-
ping carton.

Tools Needed

• Medium Phillips Screwdriver

• 3/8" Open or Adjustable Wrench

• Hammer

1.

Slide axle through wheel support
frame. Install wheels on axle.

IMPORTANT:

 When installing wheels,

point extended hub of wheels toward
wheel support frame (see Figure 3).

ASSEMBLY

(For 110,000 and 150,000 BTU/
Hr Models Only)

Figure 3 - Wheel and Handle Assembly, 110/150,000 BTU/Hr Models Only

Wheel
Support
Frame

Wheel

Extended
Hub

Hot Air
Outlet

Fuel
Tank
Flange

Cap Nut

Axle

Screw

Front
Handle

Air
Inlet

Nut

2.

Place cap nuts on axle ends. Gently tap
with hammer to secure.

3.

Place heater on wheel support frame.
Make sure air inlet end (rear) of heater
is over wheels. Line up holes on fuel
tank flange with holes on wheel sup-
port frame.

4.

Place front handle on top of fuel tank
flange. Insert screws through handle(s),
fuel tank flange, and wheel support
frame. Attach nut finger tight after each
screw is inserted.

5.

After all screws are inserted, tighten
nuts firmly.

VENTILATION

Provide a fresh air opening of at least three
square feet for each 100,000 BTU/Hr rat-
ing. Provide extra fresh air if more heaters
are being used.

Example:

  A 150,000 BTU/Hr heater re-

quires one of the following:

• a two-car garage door raised six inches

• a single-car garage door raised nine

inches

• two thirty-inch windows raised twelve

inches

 WARNING: Follow the mini-

mum fresh, outside air ventila-
tion  requirements. If proper fresh,
outside air ventilation is not pro-
vided, carbon monoxide poison-
ing can occur. Provide proper
fresh, outside air ventilation be-
fore running heater.

Содержание HH110

















Отзывы:

Нет отзывов