Homelite HBL26BVB, Инструкция по эксплуатации, Страница: 8 / 40

Original instructions | English
6
BLOWER TUBE AND NOZZLES
The blower tube can be installed on the blower
without using any tools.
POSITIVE SWITCHES
The product has positive switches at the
blowing and vacuuming opening sides. The
unit will only run if both the metal contacts
are inserted into the positive switches. When
running the unit in blower mode, the metal
contact on the blow tube and the door must be
inserted into their respective positive switches.
When running the unit in vacuuming mode,
the metal contact on the adaptor tube and
the vacuum tube must be inserted into their
respective positive switches. This reduces the
risk of accidental contact with rotating parts.
TWO ENGINE KILL SWITCHES
There are two ON/OFF switches, blower and
vacuum mode switches, in the top handle,
so that the engine can be stopped easily by
pressing either switch. Both switches should
be set to “I“ (ON) to run the engine.
ENGINE
The blower has a powerful 26 cc engine with
sufficient power to handle tough blowing and
vacuuming jobs.
THROTTLE TRIGGER
The blower can be operated at any speed
between idle and full throttle.
VACUUM
Converting the blower to a vacuum is
simple and can be done using a cross head
screwdriver.
VACUUM BAG
The vacuum bag attaches to the blower easily
by using the vacuum bag adaptor.
VACUUM HANDLE
This feature allows the user to perform
vacuuming duties comfortably.
VACUUM TUBES
The vacuum tubes can be installed on the
blower using a cross head screw driver.
ASSEMBLY
UNPACKING
The product requires assembly.
■
Carefully remove the product and any
accessories from the box. Make sure that
all items listed in the “What’s in the box”
section are included.
WHAT’S IN THE BOX
See page 14.
■
Blower/Vacuum x 1
■
Blower tube/nozzle
x 1
■
Upper vacuum tube x 1
■
Lower vacuum tube x 1
■
Adaptor installed in vacuum bag x 1
■
Lubricating oil x 1
■
Operator’s manual x 1
TOOLS NEEDED
The following tools are not included in the
package but are needed for the assembly:
■
Socket wrench
■
Phillips head screwdriver
■
Flat head screwdriver
WARNING
Do not use the product if any parts in the
“What’s in the box” section are already
assembled when you first open the box.
The parts on the list are not assembled
by the manufacturer and require customer
installation. Use of a product that may have
been improperly assembled could result in
serious personal injury.