homelabs Home HME020519N Скачать руководство пользователя страница 4

6

7

Important Safety Instructions

Important Safety Instructions

Read and follow the safety precautions below to avoid fire, electrical shock, injury, or property loss.

•  Always operate the product from a power source of the same voltage and frequency as indicated on 

the rating label of the unit. 

•  The appliance is for indoor use only.
•  Do not use the unit with a socket under repair or one that is not installed properly. Make sure the 

power cord is firmly plugged into the outlet, otherwise it can lead to electrical shock or fire.

•  Do not use the unit in an area:

 

That is near to sources of fire;

 

Where oil or water is likely to splash;

 

Exposed to direct sunlight;

 

– That is near to a bath, laundry, shower, swimming pool or other sources of water.

• 

Do not insert fingers or rods into the air outlet. Take special care to warn children of these dangers.

•  Always transport your appliance in a vertical position. 
•  Place the appliance on a stable, level surface during use to locate the compressor properly.
•  Always disconnect the appliance before cleaning or maintenance.
•  Do not use hazardous chemicals such as wax, thinner, or a strong detergent to clean the unit. Use a 

soft cloth to clean the housing to avoid damaging the surface finish.

• 

Do not use the unit in the presence of an inflammable substance or vapor such as alcohol, 

insecticide, or gasoline, etc.

• 

When moving the appliance, always disconnect the power supply first and move the unit slowly.

• 

To avoid the risk of fire, do not cover the air conditioner.

•  All the air conditioner sockets must comply with the local electrical safety requirements.
•  Children should be supervised to ensure that they do not play with the appliance.
• 

If the supply cord is damaged, it must be replaced by the manufacturer, or a similarly qualified 

person in order to avoid hazards.

•  This appliance is not intended for use by persons (including children) with reduced physical, sensory, 

or mental capabilities, or with the lack of experience and knowledge on its use, unless they have 

been given supervision or instruction concerning the use of the appliance by a person responsible 

for their safety. Children should be supervised to ensure that they do not play with the appliance. 

Cleaning and user maintenance shall not be made by children without supervision.

• 

The appliance shall be used only in a well-ventilated area, with the correct room size as specified for 

proper appliance operation.

•  Contact an authorized service technician for repair or maintenance of this unit.
•  Do not pull, deform, or modify the power cord. Do not immerse the power cord in water. Pulling or 

misuse of the power cord can cause damage to the unit and lead to electrical shock.

•  Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance 

and repair that require the assistance of other skilled personnel shall be carried out under the 

supervision of an authorized person competent in using flammable refrigerants.

•  Do not operate or stop the unit by inserting or pulling out the power plug as it may cause electrical 

shock or fire.

•  Unplug the unit if you notice strange sounds, smell, or smoke coming from it.
•  Exercise caution and provide supervision when this unit is used in the presence of children, the 

elderly, or anyone with physical or mental incapacity. Children shall not play with the appliance. 

•  Switch off and unplug the unit when it is not in use. 

Grounding

•  Always ensure effective and proper grounding. Incorrect grounding could lead to electrical shock.

• 

Avoid fire hazards or electrical shock. Do not use an extension cord or an adapter plug. Do not 

remove the prong from the power cord.

•  Only use grounded outlets.
•  Do not, under any circumstances, cut, remove, or bypass the grounding prong.
• 

The power cord is a 3-prong grounded plug and has a current detection feature. Do not replace or fix.

WARNING

Caution: Risk of Fire
The 4 statements on the left are accompanied by the 

“Risk of Fire” symbol. This symbol shows a flame in a 

triangle (warning symbol W021 of ISO 7010).

Do not accelerate the 

defrosting or cleaning process 

by any means other than 

those recommended by the 

manufacturer.
Store this unit in a room 

without open flames and 

ignition sources such as gas 

appliances or electric heaters.
Do not pierce or burn.
Please be aware that 

refrigerants may be odorless.

R32 Refrigerant Warnings

•  The maximum refrigerant charge amount: 690g for 6K, 400g for 8K, and 900g for 10K.
•  If refrigerant gas leaks during installation, ventilate the area immediately. Toxic gas may be produced 

if the refrigerant comes into contact with fire.

•  After completing installation, check for refrigerant gas leakage. Toxic gas may be produced if the 

refrigerant gas leaks into the room and comes into contact with a source of fire, such as a fan 

heater, stove, or cooker.

• 

This air conditioner should be installed by qualified personnel to eliminate static electricity during 

installation.

•  When installing or relocating the air conditioner, be sure to bleed the refrigerant circuit to ensure it 

is free of air, and use only the specified refrigerant (R32). The presence of air or other foreign matter 

in the refrigerant circuit will cause an abnormal rise in pressure, which may result in equipment 

damage and even injury. 

•  Keep any required ventilation openings clear of obstruction.
•  Servicing shall be performed only as recommended by the manufacturer.
•  The appliance shall be stored in a well-ventilated area where the room size corresponds to the room 

area as specified for operation.

• 

The appliance should be stored in a room without open flames e.g. a continuously operating gas 

appliance and without ignition sources e.g. an electric heater.

•  The appliance shall be stored properly so as to prevent mechanical damage from occurring.

Specific information regarding appliances with R32 refrigerant gas

•  Thoroughly read all of the warnings.
•  When defrosting and cleaning the appliance, do not use any tools other than those recommended by 

the manufacturer.

•  The appliance must be placed in an area without any continuous sources of ignition (for example: 

open flames, gas, or electrical appliances in operation).

•  Do not puncture or burn.

Содержание Home HME020519N
















Отзывы: