11
Setting and using the oven programmer/timer
Selecting manual operation mode
After your appliance is connected to your mains supply for the first
time, the numbers on the timer display will flash. Before you can select
a cooking function or set a temperature, you must set the appliance
into manual operation mode.
o
To select manual operation mode, press the manual operation
button
(4)
on the control panel.
Setting the time of day
After setting your oven for manual operation, you should also set the
time of day.
o
After pressing the manual operation button
(4)
, press the auto
cooking button
(2)
and the end of cooking button
(3)
simultaneously to enter the time setting mode.
o
Then use the plus
(6)
and minus
(5)
buttons to set the correct
time of day. The longer these buttons are held down for, the
faster the numbers will scroll on the LED display
(9)
o
After a few seconds the time will fix in the display and you will
be able to use your oven.
Before first use
o
To remove any residue from the oven that may have been left
from the manufacturing process, you should select the fan oven
or conventional oven function and set the thermostat to its
maximum temperature setting.
o
It is perfectly normal for a smell to be produced during this
process.
o
You should make sure that any windows in the room are left
open during this process.
o
It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o
You should not burn off both oven cavities simultaneously.
o
You should leave the oven on maximum setting for 30 – 40
minutes.
