HomeFree Systems Ltd
VST 800 User Manual
3
2.
Installing the Personal Watcher
Turn on the Personal Watcher by pressing the red ON button on
the electronic key.
Press the electronic key’s RED button down for one second - the
red light turns steadily ON for two (2) seconds.
If the startup command has been successfully received, the red
light on the Electronic Key will flash for two (2) seconds.
Note
that if the transmitter has failed to receive the startup
command the red light will turn off after the initial two (2)
seconds ON.
If the Electronic Key battery is low the red light will
immediately flash for two (2) seconds, once the red button is
pressed. (No command is sent to the transmitter).
Place the Personal Watcher on its side, on a non-metal surface,
for 30 seconds.
Wrap the Personal Watcher’s strap around the wrist, as done with
any wristwatch. Once the strap is closed, secure it by fastening
the metal clip. If required, slip the strap holder to hold the lose
edge of the strap.
Note:
An alarm signal is sent to the central monitoring computer
whenever the strap is open, cut, or the Personal Watcher is
removed from the wrist without opening or cutting the strap.
