Measurement Error:
Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Measurement Error:
Measurement result exceeds
measurement range. Measure again.
Air Circuit Abnormality:
Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg:
Turn the unit off to clear,
then measure again.
Data Error:
Remove and reload the batteries.
Recalibration Alert:
Recalibration recommended. See
page 25 for information.
10
9
User 1:
Appears when the monitor is operated by User 1.
User 2:
Appears when the monitor is operated by User 2.
Weak Battery Symbol:
Appears when batteries should be
replaced.
Pulse Symbol:
Shows the pulse rate per minute.
Important Health Bulletin:
See page 21 for more information.
Risk Category Indicator:
Compares readings against blood
pressure guidelines. See page 20 for more information.
Memory Select:
Identifies memory mode. See page 22 for
more information.
DISPLAY EXPLANATIONS
Systolic
Pressure
Diastolic
Pressure
Date/Time Indicator
Original Document Name: AM-LD-01-V6
Display Symbols:
(No Symbol)
Pulse Rate
If any of the following letters and numbers appear in the area that
diastolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.
/
START
STOP
MEMORY
SELECTOR
MEM
