HoMedics Tanda Luxe, Инструкция по эксплуатации

Страница: 14 / 26

12 TANDA
How to use
Get familiar with the device
The device is built with several user friendly features for a safe and easy experience.
• To activate the device press the orange power button once, the indicator light will flash green
once the device has been activated.
• The device treatment head has a built-in contact sensor , the rejuvenating red light, sonic vibration
and gentle warming will only activate when the treatment head is in direct contact with the skin.
The device will turn off automatically if it is not applied to the skin within 20 seconds or if removed
from the skin for more than 20 seconds.
• As an added safely feature the device treatment head has a built-in temperature sensor that will
turn the device off if the treatment head surface gets too warm. Allow the device to cool for 5-10
minutes before restarting.
• The device operates in three-minute cycles. An audible beep will sound every 30 seconds to let you
know that it is on. Two quick beeps will indicate when the cycle is complete. Press the power button
to reactivate.
Step 1: Prepare skin for treatment
Before use, cleanse your skin to remove makeup or creams that may contain reflective materials.
Step 2: Treat your skin
After activating the Luxe device, lightly place the treatment head over target areas (ex. around
the eyes) for 3 minutes, twice weekly.
Step 3: After treatment
Apply your favourite skincare products, as your skin is now better prepared to absorb other products.