8
9
M
Maaiin
ntteen
naan
nccee
T
To
o S
Stto
orree
You may store the unit in its box or a cool, dry place.
T
To
o C
Clleeaan
n
Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleaner to clean.
Modifications not authorized by the manufacturer may void users authority to operate this device.
N
NO
OT
TE
E:: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
N
NO
OT
TE
E:: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the users authority to operate
the equipment.
S
Seettttiin
ng
g aan
nd
d U
Ussiin
ng
g tth
hee A
Allaarrm
m
For more information see Fig. 8.
1. Press the AL SET button (Fig. 1) and the time will flash.
2. While the time is flashing, press the HOUR button until you reach the correct hour. Then press the MINUTE
button until you reach the correct minute.
N
NO
OT
TE
E:: When digits are flashing, press and hold the HOUR or MINUTE button continuously for a fast advance.
N
NO
OT
TE
E:: The PM function applies to the alarm. If the PM indicator is not displayed on the clock face, the alarm
will be set to AM. (Fig. 7).
3. Press AL SET button to set the time, or after 5 seconds the alarm will be set automatically (Fig. 1).
4. To activate the alarm you may choose one of 7 settings. To confirm your setting, the appropriate alarm
indicators will be illuminated on the clock face to the right of the time (Fig. 2).
a.) LAMP-push the AL MODE button once (Fig. 2). To set the Sunrise mode, adjust the 15/30/OFF switch (Fig. 4)
to set lamp to brighten gradually in 15 or 30 minutes or in the OFF position to set lamp to turn on to full
brightness at the set alarm time.
b.) NATURE SOUND-push the AL MODE button twice. The nature sound will be the last sound you listened to.
To change the nature sound press the nature sound button you wish and then press POWER button (Fig. 2)
c.) RADIO-push the AL MODE button 3 times. Use the tuner to adjust the radio to your desired station (Fig. 2).
d.) BEEP-press the AL MODE button 4 times (Fig. 2).
e.) LAMP & NATURE SOUND-press the AL MODE button 5 times (Fig. 2).
f.) LAMP & RADIO-press the AL MODE button 6 times (Fig. 2).
g.) LAMP & BEEP-press the AL MODE button 7 times (Fig. 2).
5. When the alarm sounds, the corresponding alarm indicator (Lamp, Sound, Radio, Beep or combination of these)
blinks. You may take the following actions:
a.) SNOOZE-press the SNOOZE button (Fig. 1). The SoundSpa Sunrise wake feature will be activated in 9 minutes.
See Fig. 8 for options. You may use this feature until you turn the alarm off.
b.) RESET-turn the alarm off by pressing ANY button but the SNOOZE button (Fig. 1). The alarm clock will
automatically reset for the next day in its current mode. The corresponding ALARM indicator (Lamp, Sound,
Radio, Beep or combination of these) will indicate this. If you wish to change the wake mode, follow step 4
under Setting and Using the Alarm.
c.) OFF-to completely turn off the alarm continue to press the AL MODE button until all the of the alarm indicators
(lamp, sound, radio, beep) are off (Fig. 1).
N
NO
OT
TE
E:: If alarm sounds for 30 minutes continuously it will automatically turn off and reset for the next day.
U
Ussiin
ng
g tth
hee P
Prro
ojjeeccttiio
on
n FFeeaattu
urree
1. To turn the projection feature on or off, press the PROJECTOR ON/OFF button once (Fig. 4). The time is now
projected on the ceiling. To turn projection off press PROJECTOR ON/OFF again.
N
NO
OT
TE
E:: If the projection feature is off you may press the SNOOZE button (Fig. 1) to trigger 5 seconds
of projection.
2. To turn the angle of the time that appears on the ceiling, rotate the TIME ROTATION KNOB (Fig. 6) until you have
reached your desired result.
N
NO
OT
TE
E:: The TIME ROTATION KNOB will rotate up to 350 degrees.
3. To focus the time on the ceiling, rotate the FOCUS KNOB (Fig. 6) until you have reached your desired result.
4. To adjust where time is projected, move projector forward or backward (Fig. 6).
F
FIIG
GU
UR
RE
E 7
7
TIMER INDICATOR
ALARM MODE
BUTTONS
AM/FM INDICATOR
PM
INDICATOR
