HoMedics Smart Scale SC-902, Инструкция по эксплуатации и информация о гарантии

Страница: 8 / 16

14 15
MEASUREMENT PROCEDURES WITHOUT BLUETOOTH®
Use these tips to get the most accurate and consistent readings from
your scale:
• Place the scale on a flat, hard floor surface. Carpeted or uneven
floors may affect accuracy. If you experience any difficulty, move
the scale to a different, hard flat surface and try again.
• You must have bare feet for estimation results. Remove your shoes
and socks before proceeding. Clean, slightly moist feet will provide
the best results. Position your feet for maximum contact with the
metal electrodes on the platform.
• Balance your weight evenly between both feet and stand still while
on the scale.
• Weigh yourself at the same time each day to see consistent trends.
Your weight and other measures will naturally vary during the
course of the day.
• IMPORTANT: The scale needs to be initialized after battery installation
or if it is moved or bumped. At all other times, you may step directly
on the scale for a reading. To initialize the scale, simply press firmly
on the scale platform. The display will turn on and automatically
turn off. Your scale is now ready for use.
Measuring by Selecting a User Number Manually
1. Press “ SET ” to turn the scale on.
2. Press “▲” or “▼” to move to your memory number (P1-P8).
3. The memory number will blink 3 times then remain steady. The display will show
your data and then zero.
( Note: if you press “ SET ” while the memory number is blinking, the scale will enter
Setting Mode instead of Measurement Mode. If this occurs, press “ SET ” to re-confirm
all the data. The scale will show the data again and then zero. When the ( ) icon
appears on the LCD the data is not sent to a mobile device.
4. When the scale shows zero, step on the
scale with bare feet, positioning your feet
evenly on the scale platform with maximum
contact with the metal electrodes.
5. Stand still while the scale measures your weight. Your weight will appear on the
screen. Continue to stand still on the scale. A moving zeros pattern shows while
the scale estimates your body composition.
6. Your body fat % ( FAT ), total body water % ( TBW ), muscle mass ( MUS ), calorie
estimate ( CAL ), and the difference between your current and goal weights are
displayed sequentially 3 times.
(A “ ” arrow by the goal weight number indicates you are over your goal
weight. A “ ” arrow indicates you are under your goal weight.)
7. The scale will turn off automatically.
Notes:
A) If the scale is paired with your mobile device and the Bluetooth® is ON, the scale
will send the measurement results to the mobile device instead of the scale, and
the scale display will be blank.
B) If the scale cannot identify the user’s memory number, it will only display the
weight. See “ Problem Solving ” section.
BODY FAT BODY WATER
MUSCLE MASS CALORIE ESTIMATE GOAL WEIGHT
MEASURING USING AUTO RECOGNITION FEATURE
After you have saved your personal profile data into a memory number and
weighed yourself once, the scale will automatically recognize you for future weigh-
ins. It does this based upon the weight of the user (it will detect all profiles /-
4.4 lbs / 2 kgs).
1. When you step the platform, if there is only one user whose last weight data is
close to the current one, the memory number will be selected automatically.
When estimates are completed, the results appear on the scale.
2. If two or more users are in a similar weight range (/- 4.4 lbs
/ 2 kgs), the scale will notify you to choose between, for example,
P1 and P2. Press “▲” or “▼” to get to the correct number and
select the user by pressing ‘ SET ’. If the scale cannot identify the
user’s memory number, it will only display the weight. See “Problem
Solving” section.
Note: You need to save your personal data in a user number before using the
automatic user identification measuring method, or the function will not work.
PRECAUTION !
The scale must
be started up
after each
battery insertion/
replacement of
battery or each
time it is moved or
bumped.
PRECAUTION !
Do Not step on scale
unevenly (X)
To avoid injury, do not
step with wet feet or on
the edge of the platform.