4. Connect Power Source
• Locate the output jack behind the AntiGravity chair in the lower right corner of the back cushion. The input jack
will also be found behind the AntiGravity chair on the right side of the seat cushion.
See Figure 7
. Firmly insert
the output jack into the input jack to connect the massage mechanism with the control panel.
• To attach the softening pad
J
align the loop strip located on the softening pad strap to the hook strip on
the back of the chair cushion to secure into place.
See Figure 8
.
• To attach the headrest
K
to the back cushion, align the loop strip on the strap of the headrest with the
hook strip on the softening pad or back of the chair cushion to secure in place.
See Figure 9
.
• Ensure the AC power adaptor cord and extends through the back of the frame. Be sure the AC adaptor
cord is not twisted or crimped between the mat and the metal frame.
6
7
Instructions for Shiatsu AntiGravity Recliner Use
Your Shiatsu AntiGravity recliner is designed to provide relaxation in a variety of positions utilizing the easy-
lock levers on each side of the armrests. The ideal position for optimum relaxation is one in which the feet are
above the heart. This position will reduce pressure on the spine and help relieve muscle tension.
N OT E
: The Shiatsu AntiGravity recliner design has a weight limit of 300 pounds. Persons exceeding this
body weight should not use this recliner.
• Before sitting in the Shiatsu AntiGravity recliner, be sure it is in the complete upright position by pushing the
levers forward toward the footrest.
• Sit in the chair and lean back slowly. Sitting all the way back in the seat will make it easier to recline. To
adjust the angle of the chair, hold on to the armrests and lean back or forward until you reach the desired
position. Lock the position into place by pulling the levers back.
• The AnitGravity recliner’s ergonomic design ensures proper spine alignment in any of its reclining positions.
• The footrest may be raised by pulling it upward. Each position will sound with a click. To lower the footrest,
raise it until it stops and then push it back towards the floor.
• Before getting out of the AntiGravity recliner, be sure to return it to its full upright position and lock into place
by pulling the easy-lock levers back.
• Stand up using the armrests for support.
Tip: To help you recline, unlock the levers and slowly raise your hands above your head and lean back. Lock
in your desired position by pulling the levers back. To sit upright, unlock the levers and move hands slowly
towards your knees while leaning slightly forward. This will bring the recliner back to its full upright position.
Power Adaptor Instructions
Connect the adaptor jack to the massage chair power receptacle located along the right side of
the chair. Once inserted, plug the other end into an AC power outlet. Use only the AC power
adaptor provided with this unit.
AC Power Adaptor Information
Your massage chair is powered by an attached custom AC home adaptor. Use only the supplied
AC home adaptor as other similar-looking adaptors may cause irreparable damage to the unit
and will void your warranty.
Massage Chair and Control Panel Instructions
Press the POWER button once to activate the control panel. The LED indicator will illuminate.
To deactivate, press again. For complete instructions, please see pages 8-9.
N OT E
: The intensity of the massage will change with the angle of the chair back. Generally,
the more the chair is reclined, the more intense the massage will be. You can adjust the
chair angle to suit your personal comfort level. You may also soften the massage force by
placing a towel between yourself and the unit.
Caution: Do not jam or force any part of your body in the moving
massage mechanism.
Automatic Shut Off
The Shiatsu AntiGravity recliner has been designed for convenience and safety. As a special
precaution against falling asleep while using the unit, or leaving the unit on while it is still in
operation, we’ve programmed it to automatically stop working after 15 minutes. This special
feature should not be considered as a substitute for OFF. Always remember to turn your unit off
when not in use.
Figure 7
Figure 8
Figure 9
Output Jack
Input Jack
AG-3000-A 5/13/04 10:35 AM Page 7
