Total Coverage Joystick -
To activate the total coverage
function, press and hold the TOTAL COVERAGE joystick
in the direction you want the massage nodes to travel.
The nodes can travel up, down, left, or right
anywhere across the back of the cushion. Once
you release the joystick, the nodes will perform
spot Shiatsu in that location.
NoTe
that if you are using a preset massage
program, engaging the TOTAL COVERAGE joystick
will override that program and move the nodes to
your desired position. The TOTAL COVERAGE joystick
will also only work in Shiatsu mode.
Shoulder Massage -
To turn on the massage
in the shoulders, simply press the SHIATSU
button in the shoulder area. The LED light
will illuminate confirming your selection. To
deselect, press the button again.
Shoulder Position Adjustment -
Once the shoulder
massage function is on, you may adjust the massage
position in the shoulder area by holding down either
arrow button until the desired position is reached.
The up arrow will move the mechanism up and the down
arrow will move it down. Once you release the button the
mechanism will stop in that place.
Shiatsu Massage -
Shiatsu is a deep kneading circular
massage
Shiatsu Programs for the Back -
Choose from 3 preset programs
where the Shiatsu massage travels up and down in a specific area of
the back. To select a program, simply press the button and the LED will
illuminate. To deselect, press the button again or press another button.
Power Button -
To turn the unit on, first press the POWER button. The LED
indicator will illuminate and confirm your selection. To turn the unit off, simply press
the button again. The LED indicator will blink with the massage mechanism returns to
its lowest point and then it will turn off.
Demo Button -
For a brief demonstration of the features of the Total Coverage Shiatsu Massage Cushion, press the DEMO
button. The unit will briefly go through each function. Once complete, the unit automatically turns off. The LED light will
blink to indicate active functions.
Heat -
For soothing heat when massage is on, simply press the HEAT button and the corresponding red LED will illuminate.
To deselect, press the button again and the corresponding LED will turn off. Heat is available in both the back and shoulder
areas, which are controlled separately. For your safety, heat cannot be turned on if the corresponding massage program is
not on.
Rolling Programs for the Back -
Choose from 3 preset programs where the Rolling massage travels up and down in a
specific area of the back. To select a program, simply press the button and the LED will illuminate. To deselect, press the
button again or press another button.
Width Adjustment -
While the unit is in Rolling massage for the back, press this button to adjust the distance or width
between the massage heads. With each press, the massage heads will move to the next available position.
NOTE: The moving dual massage mechanism on the back always “parks” or finishes in its lowest position. It will continue
to this position after the power has been turned off. If the electrical supply is interrupted, the mechanism will “park” or
move to its lowest position once power is restored.
NOTE: As with all high-quality massage products, there is a 15-minute auto shut-off on the massaging mechanism.
Do not use for longer than 15 minutes at a time.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
6
7
Total Coverage Shiatsu
Massage Cushion
