8
9
NOTE: The moving
massage mechanism
always “parks”
or finishes in its
lowest position. It
will continue to this
position after the
power has been
turned off. If the
electrical supply is
interrupted, when
power is restored,
the mechanism will
“park” or move to
its lowest position.
Demo Button
For a brief demonstration of the features of the Massage Cushion,
press the Demo button. The unit will briefly go through each
function. Once completed, the unit automatically turns off. The
L.E.D. light will blink to indicate active function.
Rolling Massage
Rolling is like two hands working slowly up and down your back.
Rolling Programs
Choose from 4 preset programs where the Rolling massage travels
up and down in a specific area of the back. To select a program,
simply press the button and the L.E.D. will illuminate. To deselect,
press the button again or press another button.
Width Adjustment
While the unit is in Rolling massage, press this button to adjust the
distance or width between the massage heads. With each press, the
massage heads will move to the next available position.
Heat Button
For soothing heat, when massage is on, simply press the heat
button and the corresponding red L.E.D. light will illuminate. To
deselect, press the button again and the corresponding L.E.D. light
will turn off. For your safety, heat cannot be turned on if no massage
program is selected.
NOTE: There is a 15-minute auto shut off on
the unit for your safety.
Power Button
To turn on the massage functions, first press the POWER
button. The L.E.D. indicator will illuminate and confirm
your selection. To turn off the massage functions,
simply press the button again. The L.E.D. indicator will
blink while the massage mechanism returns to its lowest
point and then it will turn off.
Kneading Massage
Kneading is a deep massage.
Kneading Programs
Choose from 4 preset programs
where the Kneading massage
travels up and down in a specific
area of the back. To select a
program, simply press the button
and the L.E.D. will illuminate. To
deselect, press the button again or
press another button.
Spot Massage
Feature
While the unit is in Kneading
massage, press either button to
stop and focus the massage action
in one place. Once the feature
is operating, you may adjust the
mechanism position by holding
down either button until the desired
position is reached. The Up Arrow
will move the mechanism upwards
and the Down Arrow will move it
down. Once you release the button,
the mechanism will stop in that
place.
Total Back + Shoulder
Shiatsu Cushion
with Heat
NOTE: When
“POWER” button
is pressed for
first-time use, the
moving mechanism
will automatically
move to the
lowest position
before starting a
massage program.
After initial use,
mechanism will
always park at
lowest position.
See note below
regarding parking.
