3
G
B
BATTERY CAUTIONS:
• Use only the size and type of batteries specified.
• When installing batteries, observe /- polarities. Incorrect installation of battery may cause damage
to the unit.
• Do not mix different types of batteries together (e.g., alkaline with carbon-zinc or old batteries with new ones).
• If the unit is not going to be used for a long period of time, remove batteries to prevent damage due to
possible battery leakage.
• Do not dispose of batteries in fire. Batteries may explode or leak.
INSTRUCTIONS FOR USE:
Massage Function
1. Ensure the unit is OFF
2. Wrap the belt firmly round your body
over the targeted area. If necessary
then use the velcro strap to hold in
place.
3. Press the function power ON
(up arrow
▲
) button to start the
soothing vibration massage
which encourages circulation for
muscle relief.
1. Press once for Low intensity massage.
2. Press twice for Hi intensity massage.
3. Press 3 times for Pulse Hi intensity
massage.
4. Press 4 times for Wave massage alternating
from Hi to Lo intensity.
5. Press 5 times for Lo, Hi, Pulse massage cycle.
6. Press 6 times for Lo, Hi, Pulse, Wave massage cycle.
4. Press the function power OFF (down arrow
▼
) button to reverse cycle through the massage modes and
switch OFF.
NOTE:
DO NOT use the massager continuously for more than 20 minutes.
DO NOT use the massager directly on one concentrated area of the body. Massagers are designed to be used
in a continuous motion, constantly changing the massage area.
Changing the batteries
1. Open battery cover by twisting top anti-clockwise (quarter turn) then remove the massager end (Fig 1).
2. Insert 4 ‘AA’ batteries as directed on the inside of the compartment.
3. Replace battery cover–lining up the indicator mark and arrow on the outside of the cover with the arrow
indicator inside the compartment and twist clockwise (quarter turn) to close (Fig 2).
Fig 1
Fig 2
IB-HSM100-0811-02_Layout 1 15/08/2011 14:58 Page 3
All manuals and user guides at all-guides.com
