4
5
INSTRUCTIONS FOR USE:
1. Ensure that the unit is unplugged before filling with water. Fill with warm water to the MAX fill
line located on the inside of the tub.
NOTE: HEAT WILL ONLY HELP TO MAINTAIN THE TEMPERATURE OF WATER PLACED INSIDE
THE FOOTSPA. IT WILL NOT HEAT COLD WATER. FOR A WARM WATER MASSAGE, FILL THE
UNIT WITH WARM WATER.
2. Place the unit on the floor in front of a chair. It is recommended to place the product on a towel.
3. Plug the unit into a 240V AC power supply.
4. Sit down and place your feet in the spa.
5. To operate the unit:
To activate vibration massage, press
To activate Bubble M Keep Warm, press
Vibration and Bubble massage settings can be used separately or at the same time. N.B. The
keep warm function is automatically activated when the bubbles are switched on. The vibration
massage can be used with or without water. The bubble m keep warm must only be
used with water.
6. The default time is 30 minutes – to enjoy the footspa treatment for longer press to increase to
45 or 60 minutes. The lights on the display panel will indicate which setting is selected.
7. To activate the water heater press the indicator light will show. The water heater will heat the
water to maintain the temperature between 40-45°C. To deactivate the water heater press the
button again. N.B. When filling the footspa use warm water, the heater is not designed to heat
the water from cold. Perception of temperature is individual: If the water feels uncomfortably
hot, turn off the heater and allow to cool.
8. Enjoy a deep massage by sliding feet back and forth over the stimulating nodes and rollers on
the footspa floor. The fixing bracket from one side will come away with the roller, take care not
to lose this. To reassemble: 1. Insert the free end of the roller into the fixed bracket. 2 Carefully
clip the other end, with the bracket attached, back into place.
9. Move your foot over the exfoliating pumice stone to smooth the skin. To change between the
coarse and fine stone simple lift the attachment and replace.
10. To turn off, press the buttons again to deactivate. N.B. The product will automatically switch to
stand-by mode after the chosen treatment time is up. To continue your footspa treatment, repeat
steps 5-7.
11. To empty: First, unplug the unit. Tip the unit, allowing water to pour out along the drain spout
(see fig.3).
DO NOT pour water over the control panel.
MAINTENANCE:
CLEANING
Unplug the appliance and allow to cool before cleaning. Clean only with a soft, slightly damp
sponge.
•
DO NOT immerse in any liquid to clean.
•
NEVER use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.
TO CLEAN
Place the appliance in its box or in a safe, dry, cool place. Avoid contact with sharp edges or
pointed objects which might cut or puncture the fabric surface. To avoid breakage,
DO NOT wrap
the power cord around the appliance.
DO NOT hang the unit by the cord.
PRODUCT FEATURES:
SPACIOUS DESIGN:
Comfortably fits up to
size 12/47 foot with
splash guard
BUBBLE SPA:
Enjoy a soothing and
rejuvenating bubble
massager
KEEP WARM:
Helps to maintain
water temperature
for longer. This
is automatically
activated when the
Bubble function is
switched on.
VIBRATION
MASSAGE:
Enjoy an invigorating
massage to boost
circulation. This
feature can be used
with or without water
ACU-NODES:
Stimulate the
acupressure points on
the sole of the foot.
ERGONOMICALLY ANGLED BASE
For superior comfort
FIG. 2
FIG. 3
FIG. 4
POURING SPOUT
or easy water disposal
2 X INTERCHANGEABLE
PUMICESTONES
Coarse: for exfoliation.
Smooth: for polishing skin.
EXFOLIATING
PUMICE STONES
see Fig 4.
TOUCH CONTROLS
MAGNETIC THERAPY:
With 1000 gauss rating
MASSAGE ROLLERS X4:
Roll beneath your feet
for a deep penetrating
foot massage
MAX. FILL LINE
