6
Caution:
All servicing of
this fountain
must be
performed by
authorized
HoMedics
service
personnel only.
Attention:
In order to get
best results,
please operate
pump completely
submerged.
Keep the water
level above the
minimum water
level ALL THE
TIME.
Maintenance
• To clean the pump:
Unplug from electrical outlet. Remove it from the base of the
fountain. Use a small brush or stream of water to remove any
debris (Fig 6).
• To keep water clean:
Periodically change water and clean the product according
to the water condition. Keeping the water clean prevents the
water from becoming sticky and forming micro-organisms.
• Keeping the water at an optimum level:
Add water periodically to keep water level at an optimum
level to avoid shortening the life of the pump.
NOTE: Never let the pump run dry, as this will shorten the
life of the pump.
• Fountain Storage
Unplug the fountain from the electrical outlet, empty the
water, and store in a dry, cool place.
• Changing Light bulb
First unplug fountain and let bulb cool down. Remove the
bulb cover by holding glass bulb cover in dry hand and
rubber neck with other hand. Slowly pull apart. Slight
twisting may help to loosen. Be gentle with bulb cover since
it is glass. Never pull on cord. Next pull bulb straight out and
replace with new bulb, inserting prongs into the holes.
Replace bulb cover securely.
Figure 5
