Caution — Please read all instructions carefully
before operating.
• If you have any concerns regarding your health consult your doctor
before using this product.
• Individuals with pacemakers should consult a doctor before use.
• NEVER leave the appliance unattended, especially if children are present.
• NEVER cover the appliance when it is in operation.
• DO NOT use this product for more than 15 minutes at a time.
• Extensive use could lead to the product’s excessive heating and shorter
life. Should this occur, discontinue use and allow the unit to cool before
operating.
• NEVER use this product directly on swollen or inflamed areas or skin
eruptions.
• This product is a non-professional appliance designed to provide
soothing massage to worn muscles.
• DO NOT use this product as a substitute for medical attention.
• DO NOT use this product before bed. The massage has a stimulating
effect and can delay sleep.
• NEVER use this product while in bed.
• This product should NEVER be used by any individual suffering from
any physical ailment that would limit the user’s capacity to operate the
controls or who has sensory deficiencies in the lower half of their body.
• This unit should not be used by children or invalids without adult
supervision.
Grounding Instructions
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for the electric current to
reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician
or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the
product - if it will not fit the outlet, you may temporarily use an
adapter (such as the one shown in Figure B) until you have a
proper outlet (such as the one shown in Figure C) installed by a
qualified electrician.
Figure 1
Figure 2
Figure 3
Figure 4
Grounding Pin
Adapter
Tab for
Grounding
Screw
Grounded
Outlet
Metal Screw
Figure A
Figure B
Figure C
Figure D
Figure E
CAUTION: ALL SERVICING
OF THIS UNIT MUST BE
PERFORMED BY AUTHORIZED
HOMEDICS SERVICE
PERSONNEL ONLY.
CAUTION: DO NOT FILL
WATER OVER THE RED
FILL LINE
CAUTION: NEVER TURN
MASSAGER ON WITHOUT
WATER IN IT
This product is for use on a nominal 120-volt circuit, and has a
grounding plug that looks like the plug illustrated in
Figure A.
A
temporary adapter that looks like the adapter illustrated in
Figure B
may
be used to connect this plug to a 2-pole receptacle as shown in
Figure D
if a properly grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet
Figure C
can be
installed by a qualified electrician. The tab for grounding screw
Figure B
extending from the adapter must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the adapter is
used, it must be held in place by a metal screw.
See Figures D and E.
Instructions for Use
1. Ensure that the unit is unplugged before filling. Turn the cap (See
Figure 1) counter-clockwise one-half rotation and remove.
2. Add one packet of the provided water conditioner to the unit. Any
time that you fill the unit with water, water conditioner must be added.
You may leave water in the massager for up to 6 months.
NOTE: Once you have used all of the provided water conditioner, you
may use any commercially available water conditioner for waterbeds. It
is often located in the bedding section of general merchandise stores.
The amount to be added is 1/2 oz. (approx. one tablespoon) and not the
amount recommended for a waterbed mattress.
3. Fill with water to the red fill line located inside the spout (See Figure 2).
Do not fill higher than the fill line.
4. Replace the cap by placing it upside down on the spout (See Figure 3)
and turn clockwise half a rotation. The cap should lock into place.
5. Plug the unit into a 120-volt household outlet.
6. To turn the unit ON, press the silver button in the center of the control
panel (see Figure 4).
a. The first press of the button will activate the invigorating
vibration massage. The blue Massage button will illuminate to
confirm your selection and the water mattress will also be
illuminated in blue.
b. The second press of the button will activate the Heat feature
with the massage. The red Heat button will illuminate to
confirm your selection and the water mattress will also be
illuminated in red.
NOTE: Water heat will only work while the massage feature is on. It will
take approximately 5 minutes for the water to heat up.
c. The third press of the button will turn the unit OFF.
