HoMedics BPW-800BT-WT, Инструкция по эксплуатации

Страница: 21 / 38

-20-

Switch on the Monitor
A) Put in 2 AAA 1.5V (LR03) alkaline batteries.
B) All segments appear on the screen for 3 seconds.
C) The monitor will automatically turn to sleeping
mode (all LCD segment cleared).

Setting Year, Date and Time
Year, date and time can be set by two methods, either set
manually using the
and buttons or sync automatically
using your Bluetooth smart device.
1. Set Manually
A)
Under standby mode, press button to enter
setting mode, then YEAR digit flashes. Use
button to select current year.
B) Press button ("MONTH" flashes). Press
button to adjust MONTH value (1, 2, 3,…, 12).
C) Press button ("DATE" flashes). Use
button to adjust DATE value (1, 2, 3,…, 31).
D) Adjust HOUR (1, 2, 3,……12PM,1 PM,…, 12) and
MINUTE (00,01,02,03,……59) as described in
Step A above. When settings are done, press
button to confirm the entries. The device is ready
to measure.
2. Using Your Bluetooth Smart Device
The date and time on your monitor can be automatically updated,
when you connect it with your smart device.
Once the date and time have been successfully synced, future
readings will automatically have the correct date and time.
Measurement Procedure