fig. 2
5
SAVE THESE INSTRUCTIONS
Caution: Please read all instructions
carefully before operating.
• This product is not intended for medical use. It is intended only to provide a luxurious
massage.
• If you have any concerns regarding your health consult your doctor before
using this product.
• In case of pregnancy, diabetes, pacemaker use, illness or any medical condition,
consult your doctor before using massager.
• NEVER leave the appliance unattended, especially if children are present.
• NEVER cover the appliance when it is in operation.
• DO NOT use this product for more than 15 minutes at a time.
• Extensive use could lead to the product’s excessive heating and shorter life.
Should this occur, discontinue use and allow the unit to cool before operating.
• NEVER use this product directly on swollen or inflamed areas or skin eruptions.
• DO NOT use this product before bed. The massager has a stimulating effect
and can delay sleep.
• NEVER use this product while in bed.
• This product should NEVER be used by any individual suffering from any
physical ailment that would limit the user’s capacity to operate the controls.
• This unit should not be used by children or invalids without adult supervision.
Battery Precautions
• Use only the size and type of batteries specified.
• When installing batteries, observe /- polarities. Incorrect installation of
batteries may cause damage to the unit.
• Do not mix different types of batteries together (e.g., alkaline with carbon-zinc
or old batteries with new ones).
• If the unit is not going to be used for a long period of time, remove batteries to
prevent damage due to possible battery leakage
.
4
Instructions for Use
Adaptor Instructions
1.Insert adaptor plug into the control pad. (Fig. 1)
2.Plug into a AC 120-volt outlet.
3.Place massager behind back to desired position. (Fig. 2)
4.To activate the massage action, press the massage button
on the control pad. (Fig. 3)
5.Press once for high speed, a second time for low, and press
again to turn the unit off.
6.To activate the heat function, with massage running, press the
heat button on the control pad. (Fig. 3) The LED illuminator will
glow red.
7.To turn off the heat function, simply press the heat button again.
Optional Battery Instructions
Please note: Batteries will only operate the massage
function. You must use the adaptor to activate the heat
function.
1.Locate the zipper on the back of the unit.
2.Unzip to expose the battery compartment, remove lid. (Fig. 4)
3.Insert 4 “AA” batteries. (Proper battery orientation is noted
inside the battery compartment housing.)
4.Replace the cover and zip the back portion back up, making
sure both zipper ends are touching each other to ensure
zipper is closed properly.
5.To activate massage, follow steps 3 – 5 from adaptor instructions.
fig. 1
fig. 3
fig. 4
Note:
The
micropedic™ bead pouches are designed to
provide cushioning for extra support.
NOTE: There is a 15-minute auto shut off on the unit for your safety.
BKL-110.qxd 7/24/08 10:39 AM Page 5
