HoMedics AR-NC02, Инструкция по эксплуатации

Страница: 5 / 16

8 9
NOTE: Unit will not operate unless Nano-Coil, pre-filter and grill are
properly installed.
Operating Instructions
1. On/Off and Speed Settings
1. To turn the air cleaner on, press the ON/OFF button. When the air cleaner is on,
the LED light will be lit and the air cleaner will start to operate on LOW speed.
2. There are four speed settings: Quiet
(low) (medium) TURBO.
Quiet mode is whisper quiet – below normal room noise – and is recommended
particularly for night use and uninterrupted sleep. TURBO mode gives a cleaning
power boost. When the fan is set at TURBO, it will run for 30 minutes and then
return to (low) speed.
3. To turn the air cleaner OFF, simply press the ON/OFF
again.
2. Timer Settings
There are four possible timer settings: 1 (one) hour, 4 (four) hours, 8 (eight) hours, and
12 (twelve) hours. To activate the timer, press the on the control panel. Each time
it is pressed, it will advance to the next timer setting. The timer LED will be illuminated
while the timer function is on. Cycle through 1, 4, 8, 12, then off to operate the unit
without the timer feature.
QUIET
TURBO
1hr 4hr
8hr 12hr
Fan Speed On/Off Clean Filter Timer Key
Control Panel
CLEAN
FILTER
Fig. 7
Fig. 8
Fig. 9
Filter Cleaning and Maintenance
Make sure the air cleaner is turned off and unplugged from the outlet before cleaning.
Check the filters every 30 days to see if they need cleaning. If you use your air cleaner
daily, we recommend checking the filters more frequently.
Nano-Coil Filter
1. Open the rear grill by gently pushing the
release tabs toward the outside of
the unit. See Fig. 7
2. Pull the grill away from the body until the
tabs at the bottom of the grill plate easily
slide away from the unit. See Fig. 8 & 9