6
G
B
OPERATING INSTRUCTIONS
Turning the Unit On
Take the air cleaner out of the box and remove the clear protective plastic bag
.
Place the air cleaner on a firm level surface
.
Before turning the air cleaner ON
,
you need to confirm that the filters are firmly in place and did not become
loose during shipping
.
NOTE: Unit will not operate unless filters and grill are properly installed.
1. On/Off and Speed Settings
To turn the air cleaner on
,
press the ON
/
OFF
button on the control panel
.
When the air cleaner is on
,
the
LED light in the ON
/
OFF button on the control panel will be lit and the air cleaner will start to operate on LOW
speed
.
Once the air cleaner is ON
,
press the
+
button to increase the fan speed to the MED
.
settings
.
Press the
+
again to increase the fan speed to HIGH setting
.
To decrease the fan speed
,
press the
–
button until your
desired setting is reached
.
The fan speed setting is indicated by LED ring around the fan icon
.
To turn the air cleaner OFF
,
simply press the ON
/
OFF
button on the control panel
.
2. Timer
There are four possible timer settings
: 2 (
two
)
hours
, 4 (
four
)
hours
, 8 (
eight
)
hours
,
and
12 (
twelve
)
hours
.
To activate the timer press the
+
button on the control panel under the TIMER LED screen
.
Each time the
+
button is pressed
,
it will display the successive settings
.
To return to a setting already passed
,
press the
–
button
.
Once a timer setting has been selected
,
it will remain displayed on the LED screen
.
3. Oscillation
To activate the oscillation
,
press the
button
.
To stop oscillation
,
press the button a second time
.
4. UV-C Bulb
To activate the UV
-
C bulb
,
press the UV
-
C button on the control panel
.
To turn the UV bulb off
,
press the
button a second time
.
Fig
.1
Fig
.2
Fig
.3
Fig
.4
1.
To check filter
,
open the rear grill
by gently pushing down on the
release tab on the top of the rear
grill
(
Fig
1).
2.
Open the plate outward until the
tabs at the bottom of the grill plate
easily slide away from the unit
(
Fig
2).
3.
The HEPA filters will be resting
inside the unit
.
Make sure that the
filters are firmly seated inside of the
unit
(
Fig
3).
4.
Place the tabs at the bottom of the
grill plate into the base of the unit
.
Gently push the grill plate back into
place until you hear a click sound
indicating that the grill is firmly
latched
.
Connect the power cord into a
standard AC outlet
(
Fig
4).
IB-AR29AEU-1213-01_Layout 1 20/12/2013 10:39 Page 6