6
G
B
OPERATING INSTRUCTIONS
Turning the Unit On
Take the air cleaner out of the box and remove the clear protective plastic bag.
Place the air cleaner on a firm level surface.
Before turning the air cleaner ON, you need to confirm that the filter is firmly in place and did not become
loose during shipping.
1. On/Off and Speed Settings
To turn the air cleaner on, press the ON/OFF
button on the control panel. When the air cleaner is on, the
LED light in the ON/OFF button on the control panel will be lit and the air cleaner will start to operate on LOW
speed.
Once the air cleaner is ON, press the SPEED
button to select speed settings. The speeds will cycle as follows
LOW ->MEDIUM ->HIGH
each time the SPEED button is pressed, and the corresponding symbol on the
LED control panel will light. The cycle will repeat starting back at LOW.
To turn the air cleaner OFF, simply press the ON/OFF
button on the control panel.
2. Timer
There are six possible timer settings: 2 (two) hours, 4 (four) hours, 6 (six) hours, 8 (eight) hours, 10 (ten) hours
and 12 (twelve) hours. To activate the timer and select a time setting, press TIMER
on the control panel.
Each time the TIMER
function is pressed, it will switch between settings in a repeating cycle as follows: 2
hours, 4 hours, 6 hours, 8 hours, 10 hours, 12 hours, OFF. Press again and the cycle begins again. The selection
will light up on the LED control panel matching the time period. When the timer is OFF, no selections will be lit.
Fig.1
Fig.2
Fig.3
Fig.4
1. To check filter, open the front grill by
gently pulling on the tabs on either
side of the top of the grill plate
(Fig 1).
2. Open the plate outward until the
tabs at the bottom of the grill plate
easily slide away from the unit (Fig 2).
3. The HEPA filter will be resting inside
the unit. Make sure that the filter is
firmly seated inside of the unit (Fig 3).
4. Place the tabs at the bottom of the
grill plate into the base of the unit.
Gently push the grill plate back into
place until you hear a click sound
indicating that the grill is firmly
latched. Connect the power cord into
a standard AC outlet (Fig 4).
IB-AR-20-0612-02_Layout 1 29/06/2012 14:01 Page 6