3
GB
PRODUCT FEATURES
INSTRUCTIONS FOR USE:
1. Plug into a 220-240V outlet.
2. It is highly recommended that you wear socks while using this foot
massager. Do not use the unit with shoes.
3. Place massager on the floor in front of your chair or seat and place feet in
massager.
4. To activate massage, press the POWER button
once. The button will
illuminate white to confirm your selection. The unit will start with both air
and knead at low intensity.
5. To switch the unit off, press the POWER button
once.
Air Intensity Button
1. Pressing the AIR INTENSITY button will allow you to adjust the intensity of
the air pressure, how firmly it squeezes your feet.
2. Press MODE button until AIR INTENSITY button is illuminated.
3. When first turned on, AIR INTENSITY will begin in the lowest setting with the
button illuminated dull blue.
4. Pressing the button again will change the foot pressure to medium, indicated
by a brighter blue.
5. Pressing the button a third time will change the pressure to high, indicated
by the brightest blue.
6. Pressing the button once more will return the pressure to its lowest setting.
Mode Button
1. Pressing the MODE button starts the unit with both air and knead in low
intensity. Both sides of the button will be illuminated.
2. Pressing the button again will change the unit to air only. The left side of the
MODE button will illuminate blue.
3. Pressing the button a third time will change the unit to knead only. The right
side of the MODE button will illuminate green.
4. Pressing the button once more will return the unit to air and knead. AIR
INTENSITY, MODE, and KNEAD INTENSITY buttons will all be illuminated.
Knead Intensity Button
1. Pressing the KNEAD INTENSITY button will allow you to adjust the intensity
of the massaging mechanism.
2. Press MODE button until the KNEAD INTENSITY button is illuminated.
3. When first turned on, KNEAD INTENSITY will begin in the lowest setting with
button illuminated dull green.
4. Pressing the button again will change the massage intensity to medium,
indicated by a brighter green.
5. Pressing the button a third time will change the intensity to high, indicated
by the brightest green.
6. Pressing the button once more will return the intensity to its lowest setting.
Heat Button
1. To activate soothing heat, first select AIR or KNEAD. Then simply press the
HEAT button and it will illuminate red.
2. To turn heat off, press the button again and the red light will turn off.
NOTE:
For your safety, heat cannot be turned on unless air and/or knead
program is selected.
NOTE:
• DO NOT attempt to stand on this Foot Massager. Use only while seated.
• DO NOT use the massage or heat functions continuously for more than 15
minutes.
• There is a 15 minute auto shut-off on this appliance for your safety. This
feature should not be considered as a substitute for ‘OFF’. Always remember
to switch the appliance off when not in use.
Mode Button
Activates air only, knead only, or a combination of both
Air Intensity Button
Choose low, medium,
or high compression intensity
Knead Intensity Button
Choose low, medium, or high
kneading intensity
Power Button
Activates massage and heat
functions
Rotating Massage Nodes
For tired soles and arches
Heat Button
Soothes tired soles and arches
