This guide provides a brief overview on testing your blood glucose. If you need information about setting up your
Meter with correct date and time, consult the “Getting Started” section of Owner’s Booklet. For more detailed
information on complete blood glucose testing procedure, consult “Testing Your Blood” section in the Owner’s
Booklet. For assistance using your blood glucose Meter, call our Technical Support Department at 1-800-803-6025.
© 2008 Home Diagnostics, Inc. TRUEresult, TRUEtest and the Home Diagnostics
logo are trademarks of Home Diagnostics, Inc. E4HDI08 Rev. 2
Blood Glucose Testing
Wash your hands with
warm, soapy water.
Remove Test Strip from vial and
close vial immediately. Insert Test
Strip into Test Port with TRUEtest™
facing up. The Meter turns on.
1
2
Lance your finger.
Allow a blood drop to
form, touch tip of strip to
top of blood drop until
Meter beeps.
3
Hold Meter in a vertical position with Test Strip
facing down. Press Strip Release Button to
discard the used Test Strip from the Meter.
6
4
In as little as 4 seconds, glucose
result will be displayed with date
and time.
5
www.homediagnostics.com
Checking Your
Blood Glucose
Using
TRUEresult
™
A guide for testing
your blood glucose
Simple Steps
to Test Your
Blood Glucose
Meter, Test Strips & System Components
Test Strip
Display
Battery
Compartment
Meter
Label
Test
Port
Contact End
(TRUEtest name
facing up)
Sample End
(Tip)
Front
Back
Fort Lauderdale FL 33309 U.S.A.
1-800-803-6025
1-954-677-9201
Use Battery/Pila/Pilha CR2032
For
in vitro
diagnostic use only
E4HDI09 Rev. 3
Strip
Release Button
124252_E4HDI08.qxd:124252_E4HDI08 8/26/08 7:51 AM Page 1
