22
7.
With Strip still in Meter, touch edge
of Test Strip Sample Tip to blood
drop and hold. Allow blood to be
drawn into Strip until
testing begins.
Note:
If Meter does not begin testing soon after
touching blood drop to Sample Tip, discard
Strip. Repeat test with new Strip and new
blood drop. If problem persists, see
Troubleshooting
.
8.
Dashes appear across Display to
show Meter is testing. Remove Strip
from drop.
9.
After the test is finished, result is
displayed. Record result in log book.
10.
Hold Meter with Strip pointing
down. Press Strip Release Button to
discard Strip in the appropriate
container. Meter turns off.
Result is stored in Memory.
Note:
Removing Strip before result
displays cancels the test. An
error message appears and
result is not stored in
Memory. Retest with a new
Strip and do not remove
before result is displayed.
T2go_OB_GutsENG_F4HDI04.qxd:TT_OB_GutsENG.qxd 1/29/10 10:39 AM Page 22
