Battery and the battery cover—
Rotate the battery cover counterclockwise,
open the battery cover, rotate clockwise to tighten the battery cover. Please pay
attention to use 9V alkaline battery. The lifetime of the alkaline battery is about 20
hours. When replacing batteries, make sure the battery buckle is in good contact, and
the O-type rubber ring is placed properly, the battery cover is tightened, in order to
prevent water leakage.
Leather cover and wristband—
Insert the locater into the leather case. Put the
wristband on the battery cover.
Automatic Shutdown—
5 minutes with no operation, it will shut down
automatically.
Battery
Please use 9v alkaline battery, fasten the battery buckle on the 9v battery, put it
into the battery box, and then screw the battery cover.
Fig 2
Note:
The white LED flashes continuously, indicating that it is time to replace
batteries.
Some batteries have stronger internal resistance. It can’t provide the motor
enough electric current. It will also appear the same situation. You need to replace
better batteries.
Caution:
If you want to dive, you must lock the battery cover.
Quick-Start
In order to master the use method of the locater, it’s recommended you read the
quick start carefully and practice indoors. After getting familiar with the basic
performance of the locater, you should explore treasures outdoors
1.
Prepare metal samples