8
5. DRAINAGE
There are two ways to remove collected water
A. Manual draining: Empty water tank manually.
B. Continuous draining: Use gravity to drain condensate water by connecting a drain hose.
5.3.1 EMPTYING THE WATER TANK
When the water tank is full, the unit turns off automatically. It will run again once you empty the water tank and
install it back properly.
1) When the tank is full, The unit will make a buzzing sound, and the “Water Full” light turns on.
2) Press the POWER button to turn off the unit.
3) Pull on the water tank and simply slide out of the body of the dehumidifier.
4) Empty the water into an area with a drain or outside.
5) Clean the inside of the tank as well as the outside.
6) Put back the empty tank into the unit properly.
7) Press the POWER button to resume operating.
8) If the Water Full light does not extinguish, check that the float is in correct place.
1.
Pull out the water tank
