HOMEDEPOT L-GZ636PST-B, Инструкция по сборке

Страница: 10 / 11

CARE AND MAINTENANCE

Check all nuts and bolts periodically for tightness. When required, tighten them again.

This gazebo is intended for decorative and sunshade purposes only, and is not
designed to withstand hard weather, including high winds, rain or snow. In order to
avoid damage, remove accumulated water on the roof immediately, or disassemble
the gazebo.
20. Put the Big Top Roof
Panel 1 (R2) and the Big Top
Roof Panel 2 (R3) onto the big
top, and then secure both of
them (R2 & R3) to the Big Top
Beam (E) with Screws (II) and
Flat Washers (BB).
21. Put the Big Roof Panel
Cover 4 (T4) onto the Big Top
Roof Panel 1 (R2) and the Big
Top Roof Panel 2 (R3), and then
secure all of them (T4 & R2 &
R3) to the Big Top Left Support
Bar (K2) and the Big Top Right
Support Bar (K3) with Screws
(FF) and Flat Washers (BB).
22. Put the Big Roof Panel
Cover 3 (T3) onto the Big
Top Roof Panel 1 (R2) and
the Big Top Roof Panel 2
(R3), and then secure the
Big Roof Panel Cover 3
(T3) to the Big Top Bar (H)
with Bolts (AA) and Flat
Washers (BB).
23. Attach the Big Roof Panel
Cover 1 (S2) to the Big Top
Slanting Bar (D) with Screws
(GG) and Flat Washers (BB).
Repeat this procedure to
attach the Big Roof Panel
Cover 2 (S3) to the Big Top
Beam (E).
24. Secure the gazebo with the
Stakes (HH) to the ground.