STEP 5
STEP 6
STEP 7
STEP 8
MODEL :
ASSEMBLY INSTRUCTIONS
PAGE: /4
3
HAMMER
REQUIRED
Assemble panel (6) to entire body with hardware G.
(Repeat 35 times.)
x35
HIT
G
3
2
6
- Insert hardware I into mounting positions on panel (3), (4) and (5) by hand.
(Repeat 32 times.)
- Assemble the panel (7) and (8) into between panel (3), (4) and (5).
(Repeat 8 times.)
x32
PRESS
I
7
7
7
7
3
5
1
2
- Fix hardware H into panel (3), (4) and (5) by using hardware E.
(Repeat 2 times for each hardware.)
- Tighten or loosen the screw to adjust position of panel (9) and (10).
(Do only when needed.)
SCREWDRIVER
REQUIRED
* In this step hardware H have been assembled in panel (9) and (10).
ADJUST
ROTATE
ADJUST
x12
H
H
H
E
3
4
10
9
1
2
6
6
6
6
- Fix hardware H onto panel (9) and (10) by using hardware E.
(Repeat 2 times for each hardware.)
- Fix hardware J onto panel (9) and (10) by using hardware D.
(Repeat 2 times for each hardware.)
SCREWDRIVER
REQUIRED
x6
D
ROTATE
x12
ROTATE
H
E
9
10
J
4
8
8
8
8
10
J
10
GHSC-1408
