Form No. 3392-391 Rev A
34in Bagging Enhancement Kit
Zero-Turn-Radius Riding Mower
Model No. 131-4168
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Rubber skirt
1
Left plate
1
Right plate
1
Hex-head bolt (5/16 x 7/8 inch)
6
2
Flange nut (5/16 inch)
6
Install the kit.
WARNING
While maintenance or adjustments are being made,
someone could start the engine. Accidental starting
of the engine could seriously injure you or other
bystanders.
Remove the key from the ignition switch, engage
parking brake, and pull the wires off the spark plugs
before you do any maintenance. Push the wires
aside so they do not accidentally contact the spark
plugs.
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface and disengage the
blade control (PTO).
2.
Move the motion-control levers to the brake position,
stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3.
Allow the engine to cool before continuing with the
installation.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3392-391* A