Assembly
6
In Step 4, Tighten
The all the bolts
Upto 80%
Capacity only.
Adjust the cart so it is standing upright.
Tighten all bolts 100%. Loosen and retighten bolts to address an unevenness.
10
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800 -986 -3460
for further assistance.
A
B
C
BB
CC
2X
In Step 4, Tighten
all the bolts
Upto 100%
Capacity only.
Flip the base part as shown in picture. After this
tighten the bolt till 100% capacity.
Flip the base part
5
Flip the base part as shown in picture.
Tighten all the bolt till 100% capacity.
Stand the base upright & tighten all screws
5
7
6
Insert the drawer
Insert the drawer (G) in the drawer box (C).
Insert the drawer inside the box by pulling up the left mechanism while pushing down
the right mechanism and push the drawer until the drawer is inserted inside the glides.
Troubleshooting Tip: If the drawer does not close properly after reinstallation – check the glide
alignment, then open and close the drawer multiple times until the drawer functions properly.
·
suggesting modifying wording to “Stand the base upright & tighten all screws
o
Adjust the cart so it is standing upright.
o
Tighten all bolts 100%. Loosen and retighten bolts to address an unevenness.”
