Step 5
Hook the suspension springs (H) into the top of both swing arm tubes (6). Do the same procedure for both
sides. Hang the opposite ends of the suspension springs (H) into the holes located on the angled braces of
the top cross beam (1).
Repeat
the same procedure for both sides.
Warning:
Make sure that both ends of the suspension springs (H) go completely through the holes on the top cross
beam (1) and the swing arm tubes (6).
H
6
Step
J) into the canopy (11). Fasten them together by using screws (F) in
J).
Warning:
11
F
J
I
the pre-drilled holes. Make sure that the teeth of the canopy/frame connectors are facing towards the
inside of the frame. Attach and fasten the Canopy assembly onto the adjustable teeth on top of the
cross beam
(1) with plastic screws (I) to each side of the canopy/frame connectors (J).
ASSEMBLY COMPLETE
